I can make my own shirt!

Love these cool shirts chek them out. I'm going to make a few for a friends baby. They will be so cute on onesie's! I think I'll make one too that says I heart Daniel. He needs to know he's awesome!

guest post: diy personalized retro kid shirts

When Kai, my three-year-old, was very little, I had a hobby of stenciling tees for him. But then #2 came along, and t-shirt making time was quickly replaced by napping-on-the-couch-if-I-had-the-chance time. But all the great freezer-paper tutorials floating around right now have inspired me to finally make Dax his own personalized shirt, and I thought I'd share my take on the process. So, to make your own retro personalized tee:

Step 1: Download the font 'Candice'

Step 2: Print out the name you'll be using for the design directly onto a piece of freezer paper trimmed to 8.5" x 11."


Step 3: Carefully cut out each letterform using a craft knife, saving the inside pieces of your letters (like the inside areas of my 'D' and 'a'). Take care to have clean cuts, resisting any urge to tear away any pieces that may be attached. Because a stencil with crisp lines = a crisp paint job on the shirt.

Step 4: Lay out the letters you just cut out onto your shirt. This is for placement purposes. So you know exactly where to lay down your stencil (second pic below). And I highly, highly recommend American Apparel tees. Here is a link to the ones I used, and link to baby onesies and lap tees.


Step 5: Remove the letter cutouts so that all you are left with is the stencil. Lightly run over the stencil with a hot iron. Add in those tiny inside pieces of your letters and iron again, making sure the inside edges of the stencil completely adhere to the shirt.


Step 6: Paint!


Now this is where my tutorial differs from the ones I've seen online. I'm only able to get my hands on the "cheap" fabric paint locally. And since I'm too impatient to order the good stuff, I settle on these for instant gratification.


Roll or brush on the ink, painting away from the edges of the stencil. You don't want to push any ink under the edges of your stencil, otherwise you won't have sharp edges. I find that I have to use a considerable amount of paint to get it really solid. Just add the paint gradually and make sure a piece of paper or cardstock is under that t-shirt to prevent any paint from soaking through.

If you have the patience, you may want to do a couple practice runs on a test fabric before you paint on your pretty shirt. Of course, this means cutting out more stencils because each stencil is a one-time-deal.

Step 7: When dry, slowly and carefully, peel off the stencil. Using tweezers, pull off the smaller stencil pieces. I've also done this part successfully while the paint was still wet. I actually got a cleaner line because this type of fabric paint tends to dry thickly, almost like a thin layer plastic. Just be careful not to smear the paint if you go the wet route.


Step 9: Set the paint by lightly ironing the backside.



My head was in the shirt stenciling game when I put together this tutorial, so I went ahead and made an age one for Dax. The font I used here is Rosewood (you'll have to purchase this one). Quite a bit of cutting involved, but I think it turned out pretty awesome. Even big brother Kai really liked "the shirt with the number on it."


And lastly, I wanted to add a download of one of my very first t-shirt stencils, bird on a branch. Hope you can find some fun applications for this! I plan to add another stencil download at my blog Ambrosia Girl next week, so make sure to stop by.